End-to-End Control of a Powered Knee-Ankle Prosthesis Towards Unified, Tuning-Free Assistance
End-to-End Control of a Powered Knee-Ankle Prosthesis Towards Unified, Tuning-Free Assistance
This research presents the real-time deployment of an end-to-end controller for a powered knee-ankle prosthesis that eliminates the need for manual tuning and intent classifiers.
The study demonstrates real-time deployment of an end-to-end controller for a powered knee-ankle prosthesis on four participants, showing that the system reproduces training-data scaling of peak ankle torque and knee pre-flexion across level ground, ramps, and stairs without subject-specific tuning, though results are limited to initial evidence from a small cohort.
Source: arXiv Robotics — research abstracts · Read original article ↗
Loading article text…
What the source reports
Publisher-reported claims, with original evidence. These results have not been independently verified by RoboSignal.
Reported numbers
percent
0.85
View original evidence
e torque with walking speed (deployed 0.85 Nm/kg per m/s, p = 0.001; training 0.96 Nm/kg per m/s, 95% CI [0.42, 1.50], p = 0.002), after excluding one outlier traced to atypical prosthesis loading. During ramp ascent, the controller scaled knee pre-flexion with grade (deployed 2.92 deg/deg, p = 0.027; training 3.30 deg/deg, 95% CI [1.83, 4.77], p < 0.001). During ramp descent, the controller increased resistive knee
Open source S4percent
0.96
View original evidence
e torque with walking speed (deployed 0.85 Nm/kg per m/s, p = 0.001; training 0.96 Nm/kg per m/s, 95% CI [0.42, 1.50], p = 0.002), after excluding one outlier traced to atypical prosthesis loading. During ramp ascent, the controller scaled knee pre-flexion with grade (deployed 2.92 deg/deg, p = 0.027; training 3.30 deg/deg, 95% CI [1.83, 4.77], p < 0.001). During ramp descent, the controller increased resistive knee
Open source S4percent
2.92
View original evidence
e torque with walking speed (deployed 0.85 Nm/kg per m/s, p = 0.001; training 0.96 Nm/kg per m/s, 95% CI [0.42, 1.50], p = 0.002), after excluding one outlier traced to atypical prosthesis loading. During ramp ascent, the controller scaled knee pre-flexion with grade (deployed 2.92 deg/deg, p = 0.027; training 3.30 deg/deg, 95% CI [1.83, 4.77], p < 0.001). During ramp descent, the controller increased resistive knee
Open source S4percent
3.3
View original evidence
e torque with walking speed (deployed 0.85 Nm/kg per m/s, p = 0.001; training 0.96 Nm/kg per m/s, 95% CI [0.42, 1.50], p = 0.002), after excluding one outlier traced to atypical prosthesis loading. During ramp ascent, the controller scaled knee pre-flexion with grade (deployed 2.92 deg/deg, p = 0.027; training 3.30 deg/deg, 95% CI [1.83, 4.77], p < 0.001). During ramp descent, the controller increased resistive knee
Open source S4percent
0.16
View original evidence
torque relative to level walking (deployed +0.16 Nm/kg, p < 0.001; training +0.16 Nm/kg, p = 0.008). Seamless stair transitions were generated for both intact- and prosthetic-side-leading sequences in ascent and descent, despite the training data containing only one limb-leading sequence. These results provide initial evidence towards end-to-end control that can provide unified, mode-adaptive prosthetic assistance wi
Open source S5
- paper: not_reported
Source excerpts and review record
Automatically extracted; no manual editorial approval recorded.
arXiv:2606.07902v2 Announce Type: replace Abstract: Powered prostheses conventionally rely on impedance controllers that require extensive manual tuning and explicit mode classification. In this work, we present real-time deployment of an end-to-end prosthesis controller that estimates continuous actuator signals from onboard sensors, eliminating the need for intent classifiers and subject-specific tuning. Temporal C
Open source S2
onvolutional Networks were trained on a multi-terrain dataset from 18 individuals with transfemoral amputation and deployed in real time across five locomotion modes. Four participants (three able-bodied, one with transfemoral amputation) ambulated across level ground, ramp ascent and descent, and stair ascent and descent. During level walking, the deployed controller reproduced the training-data scaling of peak ankl
Open source S3
e torque with walking speed (deployed 0.85 Nm/kg per m/s, p = 0.001; training 0.96 Nm/kg per m/s, 95% CI [0.42, 1.50], p = 0.002), after excluding one outlier traced to atypical prosthesis loading. During ramp ascent, the controller scaled knee pre-flexion with grade (deployed 2.92 deg/deg, p = 0.027; training 3.30 deg/deg, 95% CI [1.83, 4.77], p < 0.001). During ramp descent, the controller increased resistive knee
Open source S4
torque relative to level walking (deployed +0.16 Nm/kg, p < 0.001; training +0.16 Nm/kg, p = 0.008). Seamless stair transitions were generated for both intact- and prosthetic-side-leading sequences in ascent and descent, despite the training data containing only one limb-leading sequence. These results provide initial evidence towards end-to-end control that can provide unified, mode-adaptive prosthetic assistance wi
Open source S5
Source：arXiv Robotics — research abstracts · arxiv.org