Why Automated Cells Are Pulling Inspection Onto the Shop Floor
Why Automated Cells Are Pulling Inspection Onto the Shop Floor
Factories installed 542,000 industrial robots in 2024, more than double the number a decade earlier. As automated cells run longer with fewer people, manufacturers are moving coordinate measuring machines (CMMs) closer to production to check parts within minutes of machining. Temperature remains a key challenge, and data standards like MTConnect help integrate inspection into the production process.
Source: Robotics & Automation News · Read original article ↗
Loading article text…
What the source reports
Publisher-reported claims, with original evidence. These results have not been independently verified by RoboSignal.
Reported numbers
industrial robots installed
542,000 robots
View original evidence
Key Points Factories installed 542,000 industrial robots in 2024, more than double the number a decade earlier, according to the International Federation of Robotics. As cells run longer and with fewer people, many manufacturers are moving coordinate measuring machines closer to production so parts are checked within minutes of machining. Temperature is the main challenge on the floor, since 20 °C has been the refere
Open source S2
- paper: not_reported
Source excerpts and review record
Automatically extracted; no manual editorial approval recorded.
Key Points Factories installed 542,000 industrial robots in 2024, more than double the number a decade earlier, according to the International Federation of Robotics. As cells run longer and with fewer people, many manufacturers are moving coordinate measuring machines closer to production so parts are checked within minutes of machining. Temperature is the main challenge on the floor, since 20 °C has been the refere
Open source S2
customer’s own floor. More Robots, More Parts to Check Automation on the factory floor keeps growing. The International Federation of Robotics reported 542,000 industrial robot installations in 2024, more than double the number recorded ten years earlier, with the global operational stock reaching about 4.66 million units. In the Americas, installations reached 50,100 units, including 34,200 in the United States and
Open source S5
hether to adjust an offset or keep running. That kind of closed loop is where much of the value of on-floor inspection shows up. Choosing the Right Machine for the Floor Not every CMM is built for life beside a machining center. Shop-floor models are designed to tolerate temperature swings and vibration, while bridge machines in controlled rooms remain the best choice for the tightest tolerances. Many manufacturers e
Open source S10
Source：Robotics & Automation News · roboticsandautomationnews.com